Microsoft teams for vdi – microsoft teams for vdi
We recommend using the bit installer on a bit operating system. At this point, the golden image setup is complete. Installing Teams per-machine is required for non-persistent setups.
The following table lists the differences between these two parameters. We recommend you make sure to update Teams at least once a month. To learn more about deploying the Teams desktop app, check out Deploy the Teams desktop app to the VM. We recommend you use per-machine installation for better centralized management for both pooled and personal host pool setups.
Per-user installation only works on personal host pools. If your deployment uses pooled host pools, we recommend using per-machine installation instead.
After installing the WebSocket Service and the Teams desktop app, follow these steps to verify that Teams media optimizations loaded:. If media optimizations loaded, the banner will show you Azure Virtual Desktop Media optimized. If the banner shows you Azure Virtual Desktop Media not connected , quit the Teams app and try again. If you see the same behavior on the web client, or if you find that a feature is missing, contact Microsoft for further assistance.
This section describes how to collect logs from the virtual desktop, the client device, and the Microsoft Teams app. The improved end-user experience, decreased load on the data center, and decrease in network traffic make Media Optimization for Microsoft Teams a compelling feature.
A thoughtful rollout plan will keep users productive. See the Microsoft Documentation for details about Microsoft Teams installation, performance considerations, and feature limitations. See the VMware Horizon Documentation for details about supported features and limitations. This message will close in seconds. You are about to be redirected to the central VMware login page. Minimum Supported Horizon Client Versions Horizon supports audio, video, and screen-sharing offload to the local endpoint on Windows, Mac, and Linux platforms.
Horizon 7. System Requirements This section briefly lists the system requirements for both the client and the virtual desktop when using the Media Optimization for Microsoft Teams feature.
Pairing Modes As described in the overview of this guide, there are significant advantages to running Microsoft Teams in optimized mode. Fallback mode has the same limitations as optimized mode. Microsoft is continuously adding features. For the latest supported features list, see the Microsoft document Teams for Virtualized Desktop Infrastructure.
You can also try running Microsoft Teams from within a Chrome browser, which will give you an idea of the available functionality.
If you have full-clone persistent desktops, can you apply the GPO to only those users who will be able to run in optimized mode? If your end users do not fall neatly into a group that can run the supported versions of Horizon Clients on Windows, Linux, or Mac platforms, how many of your users are running older versions or some other unsupported OS? Can you be sure that your endpoints are running the latest version of Horizon Client for Windows, Linux, or Mac platforms?
If you decide that the benefits of optimization are worth having some users running in fallback mode, plan on resourcing your VMs to run either in optimized mode or in fallback mode.
See the requirements below. Additional Considerations When deploying this feature, also take the following guidelines into account. Optional Configuration Settings for Issues with Echo In certain low-powered clients, users may want to turn off software acoustic echo cancellation to reduce CPU usage. Set to 1 — Enable software acoustic echo cancellation irrespective of whether or not acoustic echo cancellation is available in the hardware.
Registry key not present default — Software acoustic echo cancellation is enabled only if hardware acoustic cancellation is not available.
Troubleshooting To troubleshoot, start by checking whether Microsoft Teams launched in optimized mode and whether the correct local client device names are being picked up. If the registry key is correctly set, continue to the next action item. Action 3: Restart the Microsoft Teams Application In the virtual desktop, restart Microsoft Teams to ensure that the correct settings have been applied by the Microsoft Teams client.
Action 5: Check for a Conflicting Agent Installation To ensure that Microsoft is not detecting a conflicting Citrix Agent installation on the desktop, review the Microsoft logs. Figure Device Settings for Microsoft Teams If you see the local device names in the Microsoft Teams device settings, then Microsoft Teams optimization has been enabled in your environment. Action 4: Check the html5Server Logs in the Virtual Desktop Important : For the following step, you need to have administrator privileges on your virtual desktop operating system.
Troubleshooting by Comparing with the Microsoft Teams Web App If Microsoft Teams on VDI is optimized and you are running into generic issues, or if you find that features are missing, check if you see the same behavior when using the Microsoft Teams web client.
Collecting Logs This section describes how to collect logs from the virtual desktop, the client device, and the Microsoft Teams app. Summary and Additional Resources The improved end-user experience, decreased load on the data center, and decrease in network traffic make Media Optimization for Microsoft Teams a compelling feature.
For example, some advanced features might not be available in a virtualized environment, and video resolution might differ. The Teams desktop app was validated with leading virtualization solution providers. With multiple market providers, we recommend that you consult your virtualization solution provider to ensure that you meet the minimum requirements.
Review the information in this section to ensure that you meet all requirements for proper functionality. You can download the latest version of Citrix Virtual Apps and Desktops at the Citrix downloads site. You’ll need to sign in first. For the latest server and client requirements, see the Optimization for Microsoft Teams article on the Citrix website.
VMware Horizon is a modern platform for secure delivery of virtual desktops and apps across the hybrid cloud. To offer a great end-user experience, VMware Horizon provides media optimization for Teams.
This optimization improves overall productivity across virtual desktops and apps, and enhances user experience when calling and meeting using Teams. The required media optimization components are part of the Horizon Agent and Horizon Client by default and there’s no need to install any additional plug-in to use the optimization feature for Teams.
To get the latest requirements and instructions on how to configure media optimization for Teams, see the Configuring Media Optimization for Microsoft Teams article on the VMware website. Deciding on which approach to use depends on whether you use a persistent or non-persistent setup and the associated functionality needs of your organization.
For a dedicated persistent setup, both per-machine and per-user installation will work. However, for a non-persistent setup, Teams requires a per-machine installation in order to work efficiently. See the Non-persistent setup section. With per-machine installation, automatic updates are disabled. This means that to update the Teams app, you must uninstall the current version to update to a newer version.
With per-user installation, automatic updates are enabled. Keep the Teams desktop app in your VDI environment up to date. Teams desktop app versions with release dates that are more than 90 days older than the current version’s release date aren’t supported. Unsupported Teams desktop app versions show a blocking page to users and request that they update their app.
For most VDI deployments, we recommend you deploy Teams using per-machine installation. To update to the latest Teams version, start with the uninstall procedure followed by latest Teams version deployment. For Teams AV optimization in VDI environments to work properly, the thin-client device must have access to the internet. If internet access isn’t available at the thin-client device, optimization startup won’t be successful. This means that the user is in a non-optimized media state.
In a dedicated persistent setup, users’ local operating system changes are retained after users log off. For persistent setup, Teams supports both per-user and per-machine installation. In a non-persistent setup, users’ local operating system changes are not retained after users log off. Such setups are commonly shared multi-user sessions. User personalization policy settings. Virtual Delivery Agent policy settings. Virtual IP policy settings. Connector for Configuration Manager policy settings.
Multi-type licensing. FAQ for licensing. Universal Windows Platform Apps. Connections and resources. Local Host Cache. Virtual IP and virtual loopback. Delivery Controllers. VDA registration. Use Search in Studio. User profiles. Citrix Insight Services. Citrix Scout. Configuration logging. Event logs. Advanced configuration. PIV smart card authentication. Network analysis. Delegated Administration and Director.
Secure Director deployment. Configure with Citrix Analytics for Performance. Site analytics. Alerts and notifications. Filters data. Historical trends. Troubleshoot deployments. User issues. Feature compatibility matrix. Data granularity and retention. Troubleshoot Director failure reasons. Third party notices. Document History. Aviso legal. Este texto foi traduzido automaticamente. Este artigo foi traduzido automaticamente.
The endpoint decodes and provides the multimedia locally, moving the Citrix Workspace app window back into the hosted Microsoft Teams app. Authentication and signaling occur natively on the Microsoft Teams-hosted app, just like the other Microsoft Teams services for example chat or collaboration. Citrix and Microsoft recommend the latest available version of Microsoft Teams and to keep it up to date.
Unsupported Microsoft Teams desktop app versions show a blocking page to users and request to update the app. We recommend that you follow the Microsoft Teams machine-wide installation guidelines. Also, avoid using the. All users can then uninstall Microsoft Teams if they have administrator credentials. Suppose you have Windows 10 dedicated persistent VDI environments.
In this case, use the. We recommend that you install Microsoft Teams version 1. Version 1. For example, Breakout Rooms, pop out windows for meetings and chat, or meeting reactions.
When you roam from a local session to an HDX session and if Microsoft Teams is kept open and running on the background, you must exit and relaunch Microsoft Teams to optimize with HDX correctly. Conversely, if you use Microsoft Teams remotely via an optimized HDX session, disconnect the HDX session and reconnect to the same Windows session locally at the device. Because Microsoft Teams can only assess VDI mode at app launch time, and not while it is already running on the background.
Without a restart, Microsoft Teams might fail to load features like pop out Windows, Breakout Rooms, or meeting reactions. The following is an example of folders, desktop shortcuts, and registries created by installing Microsoft Teams machine-wide installer on a Windows Server bit VM:. When using the. All the files are placed in AppData.
The best practice recommendations are based on the use-case scenarios. Using Microsoft Teams with a non-persistent setup requires a profile caching manager for efficient Microsoft Teams runtime data synchronization.
With a profile caching manager, the appropriate user-specific information is cached during the user session. For example, the user-specific information includes, user data, profile, and settings.
Synchronize the data in these two folders:. Exclude the files and directories from the Microsoft Teams caching folder as described in the Microsoft documentation.
This action helps you to reduce the user caching size to further optimize your non-persistent setup. In this scenario, the end user uses Microsoft Teams in one location at a time.
In a common virtual desktop deployment, each user is assigned to one desktop, and Microsoft Teams is deployed in the virtual desktop as one application. We recommend enabling the Citrix Profile container and redirecting the per-user directories listed in Per-user installer into the container. List all the per-user directories into this configuration. For a complete list of verified endpoints, see Thin Clients. For more information, see Prerequisites to install Citrix Workspace app.
After the update is complete, restart the Session. Root permission is required. Citrix Viewer app requires access to macOS Security and Privacy preferences for screen sharing to work. If you want to disable Microsoft Teams optimization, run this command in a terminal and restart the Citrix Workspace app:. This section provides recommendations and guidance to estimate how many users or virtual machines VMs can be supported on a single physical host.
The idea is to find out how many users or VMs can be ran on a single piece of hardware running a major hypervisor. This section includes guidance to estimate SSS. Note that the guidance is high level and might not necessarily be specific to your unique situation or environment. Citrix recommends using this guidance and these simple rules to quickly estimate SSS only. However, Citrix recommends using Login VSI or the load testing tool of your choice to validate results, especially before purchasing hardware or making any financial decisions.
Teams for Virtualized Desktop Infrastructure – Microsoft Teams | Microsoft Docs.How to make Zoom or Microsoft Teams work in your VDI infrastructure
Microsoft has finally released Microsoft Teams installer that installs all files to Program Files. But still, it is not perfect, because it supposed to be. Citrix delivers optimization for desktop-based Microsoft Teams using Citrix Virtual For more information, see Install Microsoft Teams using MSI (VDI. Step 1: Check If Microsoft Teams Launched in Optimized Mode; Step 2: Check If the Microsoft Teams Device Settings Show the Local Device Names from the Client.